Reducer: adopt third-class dead axel helical gear transmission structure gear and geaaxel are made of heat treated alloy steel.
Button Switch: easy to operate, safety for operator, both remote control and pendant control are available..
Motor: three-phase asynchronous induction motor, durable and powerful. Insulation grade is F.
Protection grade: IP54, work grade: M3.
Over load limit is available. Hook is widen and thicken.
Power-Off protection, Emergency stop system.
The CD1 and MD1 wire rope electric hoist replaced the old series.The wire rope electric hoist has the advantages of light weight, small volume, compact structure, high variety specification and smooth operation.They can do it in the same plane straight, curved, recycling use of aerial orbit, can also be in beams for the rail electric single grain and manual single beam, bridge, suspension, cantilever, such as gantry crane.
The CD1 type and MD1 electric hoist are widely used in factories, warehouses, docks, power stations, lumber mills, etc., and are the most ideal lifting equipment for lifting and carrying articles.Wire rope electric hoist running conditions: temperature: - 20 ℃ ~ + 40 ℃ working system: intermediate JC25 % of heavy: JC40 % when intermediate work system of the electric hoist lifting weight reduced by 30%, the working system of the first level JC40 % of electric hoist.
|Standard lift m||3.9||6.12||6.30||6.30||6.30||6.30||6.30|
|Lifting Height m/min||88/0.8||88/0.8||88/0.8||88/0.8||88/0.8||88/0.8||77/0.7|
|Running Speed m/min||20/30|
|Wire Rope type||6*19-3.6||6*37-4.8-180||6*37-7.4-180||6*37-11-155||6*37-13-170||6*37-15-200||6*37-15-200|
|I beam track type||16-22b||16-28b||16-28b||20a-32c||20a-32c||25a-63c||28a-63c|
|Loop track minimum Radius m||0.8||1.5||1.5-4||2.4||2.4||2.5-5||3.5-9|