Lifting belts can be divided into single layer, Double Ply Lifting Slings and four layers, and the sewing methods are various. The size can be set according to the requirements of the user (1-50 tons load, length range is 1-100 meters), and the bearing surface width can be reduced. Surface load pressure; Lifting Belt Series EB with smooth and fine outer surface, will not harm the hanging objects, can be added anti-wear protective sleeve and anti-cut protection sleeve, the safety factor ratio of 6:1; flat sling with a unique label, And use the international standard color to distinguish the bearing tonnage, even if the sling is damaged, it is easy to identify, the surface can be hardened by PU, enhance wear resistance, light and soft, easy to use in a small space; flat sling in line with Chinese industry standards J8/T8521 .1-2007, the elastic elongation of the lifting belt is small, less than or equal to 3% under the working load, and less than or equal to 0% under the breaking load, and the used temperature range is -40°C to 100°C.
The flat lifting belt uses high-quality synthetic fibers as raw materials. It uses advanced weaving technology and equipment and is sewn through different sewing methods. It can produce 4, 5, 6, 7, 8 times safety factor lifting belts according to customer requirements. Production range 0.5t-100t. And use the international standard color to distinguish the different carrying capacity, also can distinguish according to the bandwidth. During the lifting operation, no damage will be caused to the surface of the object being lifted.
According to different lifting environment requirements, it can be divided into: common type, fireproof, fluorescent, high-strength, acid-resistant, wear-resistant, oil-repellent and waterproof products.
Features: Lightweight, soft, high safety factor, long service life, non-conductive, anti-corrosion, anti-static.